Electronic antifouling

The Best Method of Speed Boat Antifouling

Speed boats are a fun way of spending your free time, but can often require some of your time and attention for less entertaining tasks as well. Speed boat antifouling is one example of such gruesome chores. Often antifouling takes up a lot of our time, not to mention our money. Nonetheless, speed boat antifouling needs to be done, but you can decide for yourself which method is the best for you.

Traditional Antifouling

Usually, antifouling is done with paint. The process includes scraping off old pieces of paint and repainting with a new coat. Although the method can be time-consuming and expensive, this is still a very widely used method and a favourite among the sailors. Especially paints that contain copper can negatively impact the environment, so make sure you consider that when you decide for your type of paint

Ultrasonic Antifouling

Ultrasonic antifouling is a new trend when it comes to boats. It is performed with a help of a small device that is attached to the hull of the boat. The little gadget gives off vibrations which prevent biomaterial from forming on the boat. Ultrasonic antifouling is relatively cheap, as you need to worry only about the initial investment. In addition to that, the device is very easy to use and demands very little attention. The downside, however, is that, on its own, the electronic kit is not fully efficient, so you will likely need a coat of paint from time to time.

Green Antifouling

Although electronic antifouling is a very green method, undoubtedly, fresh water baths are the most environmentally friendly. While the process is very time-consuming and tiresome, it will cost you the least and your conscience will be clear, as no plant or animal will be injured with this practice. There will, however, be a lot of work on your behalf, so be prepared for that.